Download Generative Programming and Component Engineering: Second by Charles Consel, Hedi Hamdi, Laurent Réveillère, Lenin PDF

By Charles Consel, Hedi Hamdi, Laurent Réveillère, Lenin Singaravelu, Haiyan Yu, Calton Pu (auth.), Frank Pfenning, Yannis Smaragdakis (eds.)

This quantity constitutes the complaints of the second one overseas convention on Generative Programming and part Engineering (GPCE 2003), held September 22–25, 2003, in Erfurt, Germany, subsidized through the NetObjectDays German commercial software program improvement occasion, in cooperation with the ACM SIGPLAN and SIGSOFT societies. GPCE was once created as an e?ort to deliver - getherresearchersworkingonboththeprogramminglanguagesandthesoftware engineeringsideofprogramgenerationandcomponentengineering. Thecommon topic of application iteration and part engineering is the domain-speci?c nature of either methods. reckoning on the features of a site, both a generative or a compositional technical answer can be applicable. in exactly its moment 12 months, GPCE has proven loads of promise for development a powerful neighborhood. The reaction to the decision for papers used to be first-class, with sixty two submissions to the technical application, 2 of which have been later withdrawn. each one paper obtained among 3 and ?ve reports, lots of them fairly thorough and confidently beneficial to all authors. The digital assembly allowed for - depthdiscussionsofallsubmissions,oftentoamuchgreaterextentthanpossible in a actual computer assembly. for this reason, 21 papers have been chosen for presentation on the convention and are incorporated during this quantity, including abstracts for the invited talks through Olivier Danvy and Peri Tarr. Of the accredited papers, three are co-authored via notebook individuals (from a complete of five workstation submissions). We attempted demanding to make sure equity and carry computer submissions to a excessive normal. The EDAS convention submission procedure was once used to control the paper submissions. Our EDAS deploy was once supported by means of Blair MacIntyre, who used to be particularlyhelpfulinresolvingtechnicalissueswiththesystem.

Show description

Read or Download Generative Programming and Component Engineering: Second International Conference, GPCE 2003, Erfurt, Germany, September 22-25, 2003. Proceedings PDF

Similar technique books

Woodworking Shopnotes 025 - Special Table Saw Issue

Each web page of ShopNotes journal will make you a greater woodworker, since you get extra woodworking plans, extra woodworking ideas, extra woodworking jigs, and extra approximately woodworking instruments — and never a unmarried advert. For greater than 25 years, woodworkers have grew to become to ShopNotes for the main designated woodworking plans and woodworking information on hand at any place.

Encyclopedia of Environmental Science and Engineering

Thoroughly revised and up-to-date, Encyclopedia of Environmental technology and Engineering, 5th variation spans the complete spectrum of environmental technology and engineering. nonetheless the main entire, authoritative reference on hand during this box, the huge two-volume encyclopedia has accelerated to incorporate 87 articles on issues starting from acid rain, pollution, and group overall healthiness, to environmental legislations, instrumentation, modeling, replacement power, toxicology, radioactive waste, and water remedy.

Memorial tributes. Volume 2

Honoring the deceased participants and international affiliates of the nationwide Academy of Engineering, this quantity is an everlasting list of the various contributions of engineering to humankind. This moment quantity of Memorial Tributes covers the interval from January 1979 to April 1984.

Extra info for Generative Programming and Component Engineering: Second International Conference, GPCE 2003, Erfurt, Germany, September 22-25, 2003. Proceedings

Example text

Such templates are polymorphic. For convenience, we also allow boxes to be replicated but the box copies all have the same monomporphic type as the original box. A box/template may optionally be replicated/instantiated a number of times. For example, instantiate t as b * 4 will introduce boxes b1, b2, b3 and b4. In the second, more substantial, example, we generate a Track template which is then instantiated to give 16 Ring boxes, named Ring1 to Ring16, and four ByPass boxes, named ByPass1 to ByPass4.

By controlling the types that are permissible in Hume: A Domain-Specific Language for Real-Time Embedded Systems 41 pattern and the constructs that are usable in function, the expressibility and hence formal properties of Hume may be altered. Although the body of a box is a single function, the process defined by a box will iterate indefinitely, effectively calling the function repeatedly on the changing inputs. 1). This roughly corresponds to tail recursion over a stream in a functional language, as used by RT-FRP, for example, to control resource bounds [30].

Are provided as default operators; they are overloaded. Special attention has to be paid for constants. Integer constants are always treated as 32-bit two’s complement values, floating-point constants TDL: A Hardware Description Language 27 as 32-bit numbers with 24-bit mantissa and 8-bit exponent. If another representation is required, this must be explicitly annotated by an appropriate type constructor. Binary and hexadecimal values are always exactly represented. 3 Constraint and Assembly Specification In the constraint section of Tdl, restrictions of instruction-level parallelism and resource usage as well as interdependencies between scheduling and allocation are modeled by specifying a set of rules.

Download PDF sample

Rated 4.83 of 5 – based on 36 votes